Скачать с ютуб Auto windows close in Mazda 626 GF and 6 GG в хорошем качестве

Auto windows close in Mazda 626 GF and 6 GG

Update for 6 GG issue: It turns out the module in the car remembers drivers glass position and when the new module changes it, after power on and auto-close function, the window automatically opens half way (so called fail safe mode). 626 GF doesn't have this issue. Here is a fix for it: https://gitlab.com/metal03326/gf-chan... Update and fix: Idle power consumption of the module is 7.5mA! Not a problem for most cars, but the 626 now has way too many modules so those 7.5mA as kind of a big problem. I was able to bring them down to 0 by adding a delay relay that cuts the power to this module 2 minutes after locking the car. Here is schematics for that: https://gitlab.com/metal03326/gf-chan... Module bought from: https://www.ebay.com/itm/Practical-Un... 00:00 Intro 01:05 Important note: No additional wires required only for the facelift Mazda 626 GF 02:26 Module signals required 04:56 GF facelift window system schematics and how it works explanation 09:55 Choosing trigger wire on the GF 14:18 Where and how to mount the module inside of the GF door 17:32 Everything but the trigger wire is connected in the GF 17:50 Two things that you need to watch out for when installing (no matter the car) 20:43 Testing with both short and long trigger signals 22:31 Module behaviour whenever all windows are already closed upon triggering 23:53 Trigger soldered for the GF 24:38 Excess wires 26:08 Double lock test on the GF 27:04 Module mounted on the GF door 28:31 Final result on the 626 GF facelift 29:22 Module sensitivity adjustment 33:21 Do NOT count on the "top window" function to work 34:36 Module installed on Mazda 6 GG pre-facelift 35:13 Pre-facelift GG window system pinout 37:22 Issues with trigger on the GG and solution 40:36 Finding a spot for the module in the GG door 41:06 Final result in the 6 GG pre-facelift 41:48 Fix for driver side automatic window function in the GG