Из-за периодической блокировки нашего сайта РКН сервисами, просим воспользоваться резервным адресом:
Загрузить через ClipSave.ruУ нас вы можете посмотреть бесплатно MeepMeep Disc Golf Trackers How To Series: Installation Guide или скачать в максимальном доступном качестве, которое было загружено на ютуб. Для скачивания выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса savevideohd.ru
Simon, Tech Lead & Co-Founder at MeepMeep Disc Golf Accessories explains how to install your disc golf tracker onto your disc. TRANSCRIPT Hi, I’m Simon, I’m Tech Lead here at MeepMeep and I’m going to show you how to install your MeepMeep tracker onto your disc. Here’s what’s included with your tracker: 1 MeepMeep tracker 3 adhesive donuts 1 cleaning wipe And instruction manual You will also need a CR2016 battery. For best results, we recommend using a high quality battery from brands such as Energizer, Duracell, Panasonic, or Maxell. Alright, the first thing you’re going to do is insert the battery. Make sure the positive, or plus, side is facing up and slide it in in the same direction as the teeth on the battery holder. Then, download the MeepMeep app from the App Store or Play Store. Enable the permissions, then tap the plus icon to pair your tracker. Once it’s connected, press the play button to start the ringtone, and tap again to stop it. Now you can grab your disc and clean the center with the included wipe. And it doesn’t hurt to wipe the underside of the tracker as well. You’ll have to carefully place the adhesive donut on the center of the disc. You can actually get it pretty close by eyeballing it right in the middle, but for best results, print and cut out our centering guide from the resources page on our website. Once you have it all lined up, peel the liner from one side and apply it to the center of the disc. Make sure to press FIRMLY all around. Ok, you’re almost done! Peel the other liner from the adhesive, line up the MeepMeep tracker, and press down. Again, press FIRMLY all around. You’re not quite ready to use the disc in play just yet, you’ll have to let the disc and tracker sit in a warm environment for AT LEAST 48-72 hours. I know it’s a long time to wait, but it’s important to let the adhesive properly bond to the disc so it can survive impacts. If you have any questions or feedback, reach out to us on our website or social media.