Скачать с ютуб 3.5 e-Adjust Piggyback Shocks Install | Falcon Shocks в хорошем качестве

3.5 e-Adjust Piggyback Shocks Install | Falcon Shocks

Gain more control over your suspension tuning with the Falcon SP2 3.5 aDAPT e-Adjust Piggyback Shocks! In addition to the 8-Position Dial, these shocks can be programmed to automatically switch from Soft to a manually preselected Firm setting depending on terrain. The aDAPT Control Module’s 3-position In-Cab Switch includes Soft, Firm, and Auto settings. “High-Value Performance” is the driving force behind our vehicle-specific Falcon shocks for Jeeps, trucks, and SUVs. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs. Falcon Performance Shocks by TeraFlex. Features & Benefits: SP2 3.5 aDAPT e-Adjust Piggyback Shocks: • SP2 3.5 aDAPT e-Adjust Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics • In Auto Setting, the aDAPT Control Module automatically switches from Soft to a manually preselected Firm setting based on driver selectable minimum “G” threshold • The desired Firm setting is controlled manually by the 8-Position Dial • aDAPT Control Module adjustment parameters: forward acceleration, lateral • acceleration, braking • Each parameter is set separately • Firm mode duration can be set between 1-5 seconds • 3-position In-Cab Switch settings include: Soft, Firm, Auto • Can also be manually adjusted from Soft to preset Firm setting • Using the Falcon App, multiple presets can be created and used for different • driving conditions • Calibrate aDAPT Control Module for various install orientations • SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings • Ideal for daily driven Jeeps as well as the serious enthusiast wanting automatic control and advanced tuning options from the driver seat JL Falcon Shocks: • JL corner-specific shock absorber w/ race-inspired performance • Front lower offset eyelet design provides maximum shock body to frame clearance during articulation • Rear roost guards prevent shock shaft damage from rocks kicked up by the tires • SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings Falcon Series 3 Piggyback Shocks: • Piggyback design increases oil and gas capacity for reduced heat • Flows 6x more oil than restrictive reservoir hose designs • Eliminates common leakage issues found in banjo and swivel fittings • Front shocks’ unique horizontal piggyback reservoir increases tire clearance • Cartridge Upgrade Kits are available separately – contact customer service for details SP2 Mode Adjust Shocks: • Choose between Soft and Performance modes during install • Tunes both compression and rebound • Soft mode allows a partial bypass of the main piston for a softer ride • During aggressive driving, Soft mode retains performance tuning for optimal handling • Soft mode recommended for rough terrain/surfaces and cold weather • Performance mode recommended for max on- and off-road handling, stability, and control Jeep Performance Shocks (All): • Vehicle-specific shock absorbers • Race-inspired performance for increased vehicle stability • Improved dynamic roll control and low-speed damping • Dramatic improvement in on-road comfort and off-road performance • Optimized fitment for unobstructed suspension travel and articulation • 2.25” shock body provides optimal performance • 6061-T6 aluminum alloy shock body resists Impact to protect internal components • Smooth honed internal shock body surface for long-term performance • 3/4” induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling • Large shaft diameter provides wide range of adjustment on adjustable shocks • Hard anodized billet piston • 1-piece Teflon bronze piston wear band w/ O-ring • VOD (Volume Optimized Damping) features a digressive linear piston • VOD reduces shock bottoming at full compression or over uneven terrain • OGS (Oil/Gas Separator) prevents cavitation • Red Line synthetic oil w/ a high Viscosity Index for consistent performance across all temperatures • Synthetic formula also contains special anti-wear and lubricity agents • 1,000-hour salt spray corrosion resistance test on all hardware • Serviceable and rebuildable (factory serviced) • Designed, engineered, and assembled in-house from domestic and globally sourced components • Patented design • 3-year warranty Note(s): • Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders – See instructions for proper configuration for your application. • May require 2” Bump Stop Strike Pad Extension Kit (# 1959500) and/or 0.5” Bump Stop Strike Pad Shim Kit(s) (# 1959300). Install Time: 1.5 Hours