Скачать с ютуб G-SHOCK GA-400 Disassemble and Assemble With Battery Change в хорошем качестве

G-SHOCK GA-400 Disassemble and Assemble With Battery Change

*Disassembly, Assembly, Battery Replacement, and Cleaning Instructions for the G-SHOCK GA-400 Watch* *Introduction* This guide provides step-by-step instructions for disassembling, assembling, replacing the battery, and cleaning the case and band of a G-SHOCK GA-400 watch. By following these instructions, you can maintain your watch and ensure its optimal performance. *Tools and Materials Required* Before beginning the process, ensure you have the following tools and materials: - A small Phillips head screwdriver - A flat-head screwdriver - A pair of tweezers - A new CR2016 coin cell battery - A soft cloth - A mild detergent solution *Disassembly* 1. *Remove the back cover.* Use the Phillips head screwdriver to remove the four screws securing the back cover. Carefully pry open the back cover using the flat-head screwdriver. 2. *Remove the battery.* Use the tweezers to remove the old battery from the watch. Be careful not to damage the battery terminals. 3. *Clean the battery compartment.* Use the soft cloth dampened with the mild detergent solution to clean the battery compartment. Ensure the compartment is dry before proceeding. *Assembly* 1. *Insert the new battery.* Place the new battery into the battery compartment, ensuring the positive (+) terminal faces upwards. 2. *Replace the back cover.* Align the back cover with the watch case and secure it using the four screws. Tighten the screws until they are snug. *Cleaning the Case and Band* 1. *Prepare the cleaning solution.* Mix a mild detergent with water to create a cleaning solution. 2. *Clean the case.* Dip the soft cloth into the cleaning solution and gently wipe the watch case. Pay special attention to the areas around the buttons and crevices. 3. *Clean the band.* Remove the band from the watch case and soak it in the cleaning solution for a few minutes. Gently scrub the band with the soft cloth to remove dirt and grime. 4. *Rinse and dry.* Rinse the case and band thoroughly with clean water and pat them dry with a soft cloth. *Conclusion* By following these instructions, you have successfully disassembled, assembled, replaced the battery, and cleaned the case and band of your G-SHOCK GA-400 watch. Regular maintenance will ensure the longevity and optimal performance of your watch.