Скачать с ютуб Making barrel rifling using steel tubes в хорошем качестве

Making barrel rifling using steel tubes

Making barrel rifling using steel tubes In this video I will show barrel rifling for a 5.5mm, or .22 cal tube using an allen key. the same allen key method can be used for other calibers too, just make sure that the rifling button is 0.1mm-0.2mm bigger in diameter than the barrel inner (bore) diameter. In my case I used a 5.62mm button for a 5.48mm tube, and it worked quite well as you can see in the video. This barrel will be used for gas propelled PCPs. Note: This video is for educational and entertainment purposes only. Do not emulate or copy anything you see in this video. Allen keys: https://s.click.aliexpress.com/e/_Dns... 12mm OD tube (ID: 5.5mm, 4.5mm, 6mm, 9mm): https://s.click.aliexpress.com/e/_DEn... 16mm OD tube (more options +7.62, 6.35, etc): https://s.click.aliexpress.com/e/_Dlo... LATHE used in the video: MINI Lathe 7x16 800W (Europe and USA link): https://s.click.aliexpress.com/e/_DlY... Asia link: https://s.click.aliexpress.com/e/_Dlt...