Скачать с ютуб 【Hardware】Electronic Speed Controller Calibration for F450 through Mission Planner в хорошем качестве

【Hardware】Electronic Speed Controller Calibration for F450 through Mission Planner

ESC Calibration for F450 through Mission Planner Date: 2023/05/09 ================================================================ 00:00 Before ESC Calibration 00:40 ESC Calibrating 03:34 After ESC Calibratoin ================================================================ Step by step 1. Connect F450 to computer using micro-USB USB cable 2. Battery connection for the F450 3. Press CONNECT button in the Mission Planner 4. Press Calibrate ESCs in ESC Calibration 5. Remove the micro-USB from F450 6. Remove the battery from F450 7. Turn on T14SG and move the bar at the RHS to the maximum 8. Turn on F450 and unlock it 9. Move the bar at the RHS to the minimum 10. Increase the RHS bar slightly and check whether the motor starts spinning 11. Finished if the spinning is simultaneous (03:00); otherwise (02:00 and 02:25), repeat steps 6 to 10. ================================================================ YouTube:    / @wish44165   Medium:   / scofield44165   GitHub: https://github.com/TW-yuhsi LinkedIn: https://www.linkedin.com/in/yu-hsi-ch... ================================================================ Acknowledgement:    • ArduCopter ECS Kalibrasyon İşlemi - A...   ================================================================ APM/Pixhawk飛控 無線wifi數傳模组: https://shopee.tw/-%E8%8F%9C%E9%B3%A5... 1) 要用在Pixhawk上請退針5P換到6P頭 2) 用手機或電腦連接上名為“IFFRC_xxxxxx”的WIFI，密碼為 12345678 2-1) 電腦方面是用MissionPlanner程式 將連線方式設為TCP 連接 192.168.4.1 port :6789 2-2) 手機方面是也用app "MissionPlanner" 這 設定TCP 連接 192.168.4.1 port :6789