Скачать с ютуб Ultracare Keranet Crystal | Concentrated powder acid cleaner to remove cementitious residues в хорошем качестве

Ultracare Keranet Crystal | Concentrated powder acid cleaner to remove cementitious residues

DESCRIPTION UltraCare Keranet Crystals is a concentrated powder acid-based product that is used with water and produces a cleaner and problem-solver for acid-resistant tile and acid-resistant non porous natural stone. It can be used both internally and externally. It removes cured cement grout haze, mortar residue, rust stains, limescale and other mineral deposits such as efflorescence. FEATURES AND BENEFITS ▪ Removes cement or limescale stains from the surface of ceramic tiles and mosaics. ▪ Removes efflorescence, rust stains and other mineral deposits from acid-resistant surfaces. ▪ For interior and exterior applications. ▪ Fast-acting and easy to use. Consult MAPEI’s Technical Services Department for the possible use of the product on surfaces and in conditions not specifically mentioned herein. PRODUCT INFORMATION UltraCare Keranet Crystals is a powder that can be diluted in water and the dilution ratio can be adjusted according to the level of dirt and residue to be removed. UltraCare Keranet Crystals is based on a special inorganic acid, with a buffered formulation, whose advantage is to have an aggressiveness towards stains and efflorescences equal to that of much stronger acids (muriatic/chloridian, sulfuric, etc.), without developing, like the latter, very dangerous toxic fumes. In any case, using the product in well-ventilated areas is recommended. RECOMMENDATIONS ▪ UltraCare Keranet Crystals may affect the appearance of some natural stone. Always undertake a test before use. ▪ UltraCare Keranet Crystals can possibly etch, lighten or change the colour of cementitious grout and some natural stone. Always undertake a test before use. ▪ Do not use on acid-sensitive surfaces such as marble, limestone in general, limestone-based materials or cementitious terrazzo tiles. ULTRACARE KERANET CRYSTALS Concentrated powder acid cleaner to remove cementitious residues. Ideal for cleaning after installation and to remove salt and limescale efflorescence ▪ Ensure that UltraCare Keranet Crystals does not come into contact with any non-recommended surfaces. ▪ Wait for the grout to completely cure before applying this product onto the surface of the tile and grout (1 to 10 days depending on the type of cementitious grout used). ▪ Do not use UltraCare Keranet Crystals with other cleaners. APPLICATION METHOD Make sure before use that the surfaces to be cleaned are acid resistant. It is advisable, in doubtful cases, to carry out preliminary tests. Before cleaning with UltraCare Keranet Crystals, protect everything that can be damaged by splashes. The surfaces to be cleaned, especially if very absorbent (Tuscan terracotta, porous ceramics, natural stone etc.) must be well moistened with clean water before treatment with UltraCare Keranet Powder. Working in a manageable area, spread UltraCare Keranet Crystals onto the already wetted floor. Allow UltraCare Keranet Crystals to sit on the surface for 2-3 minutes. Depending on the type of dirt, it may be necessary to leave the product to react for longer. Do not let the surface dry and add more water if necessary. Then work over the surface with a single- disc cleaning machine or an emulsifying pad. Remove the solution and then rinse thoroughly with plenty of clean water. If residues remain then the process can be repeated. FINAL CLEANUP After UltraCare Keranet Crystals is removed during the cleaning process detailed above, perform a final cleaning working in small areas, using if necessary UltraCare Multicleaner. CONSUMPTION Depending on the needs, it can vary based on dilution, the degree and type of dirt and the surface to be treated