Из-за периодической блокировки нашего сайта РКН сервисами, просим воспользоваться резервным адресом:
Загрузить через ClipSave.ruУ нас вы можете посмотреть бесплатно Reach Truck Training | How to Stack at Eye Level | 4KS Forklift Training или скачать в максимальном доступном качестве, которое было загружено на ютуб. Для скачивания выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса savevideohd.ru
The RTITB Reach Truck training course will give you the skills to operate a reach truck safely and efficiently, carry out a pre-use inspection, and recall the causes of truck and load instability. Operators should be trained to an essential level of skill to work with Reach trucks safely, efficiently and with competence. In this online Forklift Training video, our instructor Riz demonstrates a 90 degree turn with a laden pallet into an industrial racking and how to safely stack at eye level using a Reach Truck. This is another common truck for Novice (beginner) forklift training. Visit https://4ksforklifttrainingltd.co.uk/... for more information on Reach Truck training to book your forklift training course today or call 0121 294 9395. Reach Truck Training Steps: ► Follow the correct procedure to move off; Gear, Observation, Handbrake release and final Observation (GOBO). ► Looking at the direction of travel drive forward at a slow steady speed. ► Stay close to the racking. ► Once you come in line with the first block of the pallet (Pivot Point) apply footbrake. ► Before turning to the designated location, complete all round check and complete 90 degree turn towards designated area. ► Stop 6 inches before the racking, apply handbrake and transmissions in neutral. ► Take the tilt off the load ensuring the load and fork arms are all level. ► Before you raise the load up, ensure there are no obstacles. ► Gently raise the load up to the required height of the racking ► Complete the GOBO procedure and drive towards the racking making sure the reach truck legs remain level and stop just short of the racking. ► Once in position apply handbrake and transmissions in neutral. ► Complete all round check. ► Extend your Reach out and place the load on the racking. ► Once the load is on the racking, make sure that the fork arms are clear; not grazing the top or bottom of the pallet. ► Retract the Reach fully back. ► Select reverse and complete the GOBO procedure. ► Reverse and look in the direction of travel, 80% back, 20% forward. ► Once your fork arms are clear of the load, 6 inches, apply handbrake and transmission in neutral. ► Lower your forks back into travelling position (4-6inches off the ground) ► Apply tilt, and back to GOBO procedure and back to your starting position. 4KS Forklift Training Ltd provides RTITB accredited forklift reach truck training at both our fully approved and accredited training centres in Birmingham and Peterborough. View all our Forklift Training Courses: https://4ksforklifttrainingltd.co.uk/... ► Forklift Refresher Course: https://4ksforklifttrainingltd.co.uk/... ► Counterbalance Forklift Training: https://4ksforklifttrainingltd.co.uk/... ► Bendi Flexi Forklift Training Course: https://4ksforklifttrainingltd.co.uk/... ► LLOP PPT Training: https://4ksforklifttrainingltd.co.uk/... ► Forklift Instructor Course: https://4ksforklifttrainingltd.co.uk/... To skip to a particular section of the video please see the chapters below. ► Chapters for Reach Truck Forklift Training: 0:00 - Reach Truck Training Intro 0:08 - How to stack at eye level using a Reach Truck 0:18 - Forklift GOBO procedure to move off 0:26 - How to drive a Reach Truck 0:45 - Reach Truck 90 degree turns 1:03 - Stopping 6 inches before the racking | Reach Truck 1:15 - Raising the load at eye level Reach Truck 1:50 - How to deposit a load using Reach Truck 2:15 - How to extend Reach forks to place a load on the racking 2:47 - How to retract Reach Forks fully back | Reach Truck 3:03 - GOBO Procedure (Gear, Observation, Handbrake, final Observation) to reverse 3:35 - How to lower Reach forks back into travelling position 4:12 - How to reverse a Reach Truck with 90 degree turn ► Follow us on Facebook: / 4ksforklift ► Follow us on Instagram: / 4ksforklifttrainingcentre