Скачать с ютуб Hornby Ringfield motor upgrade kit fitting tutorial. Part 2 - Wiring for DCC. в хорошем качестве

Hornby Ringfield motor upgrade kit fitting tutorial. Part 2 - Wiring for DCC.

Video tutorial on how to wire up your Ringfield motor upgrade kit for use with DCC. Part 1, which is the fitting video guide, can be found here...    • Видео   The motor kits can be purchased on eBay here... https://www.ebay.co.uk/itm/143867454959 Other parts used in the fitting can be found as follows... Thin black wire - https://www.ebay.co.uk/itm/143841416225 Black tack - https://www.ebay.co.uk/itm/143867362024 DCC 8 pin socket / PCB - https://www.ebay.co.uk/itm/223670776213 LaisDCC decoder and stay-alive unit - https://www.ebay.co.uk/itm/192671932108 CV settings used for motor control... CV29 = 2 CV3 = 20 (acceleration rate - increase value to make acceleration slower / smoother) CV4 = 4 (deceleration rate - increase value to make acceleration slower / smoother, however you have less control of where the model stops) CV2 = 2 (min speed value) CV6 = 15 (mid speed value - should be 1/4 - 1/3 of the max speed value) CV5 = 60 (max speed value - increase value to make top speed higher) Although these are not numerical order, I suggest making those CV adjustments in the above order. A CV calculator from Digitrax, which is a very handy tool to save, is below... https://www.digitrax.com/support/cv/c... Some useful links that will go into more detail about how DCC works, CV programming and DCC conversion are below... https://www.brian-lambert.co.uk/index... - Has 2 pages dedicated to DCC and lots of other useful info. https://dccwiki.com/ - lots of in depth info on all things DCC