Скачать с ютуб How To Install Demon Eyes AND Prevent Them From Burning Out! в хорошем качестве

How To Install Demon Eyes AND Prevent Them From Burning Out!

In this video I will show you how to perform a typical demon eye installation on a headlight retrofit. The projectors being used are Morimoto H1 Bi-Xenon projectors and the demon eyes are from Profile Performance. Although Profile Performance claims that their demon eye LED modules do not require a driver, I have found that unprotected LEDs in an automotive system may be subject to high voltage spikes. Most electrical equipment used in vehicles carries an automotive rating and the components are automotive grade. This may have to do with things like temperature variation, voltage spikes, or vibrations in the vehicle environment. LEDs are typically current driven devices. However, since I do not know the exact specifications of the LEDs, I will be using a constant voltage regulator that should at least keep voltage spikes away from the more expensive LED modules. The adjustable voltage regulators can be found here: ► https://www.ebay.com/itm/223524573272... In the video you will see that I adjust the voltage to 10.5V. There is no change in perceivable brightness on these modules from 10.5 to 12V. This to give an approximate 1.5V drop out voltage when the vehicle is off and the battery is at 12V. Therefore the voltage to the demon eyes remains regulated and you will not notice a change in brightness when the vehicle is on or off. If you would like to 3D print your own regulator enclosures, see here: ► https://www.thingiverse.com/thing:470... If you are looking for more information on the Pontiac Fiero headlight retrofit kits, see this video here: ►    • How To Install Embrace Racing Quad Bi...   And this listing on my website where you can purchase a kit: ► https://via-autoworks.my-online.store... Thanks for watching! #DIY #LED #RETROFIT **************************************************************** If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here: ► https://www.paypal.com/donate/?hosted... ☕ By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can! Follow me on Instagram! ►   / embraceracing   📷 If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting... DIY and MAKER: ► The Hacksmith    / @hacksmith   ► Adam Savage Tested    / @tested   ► Thomas Sanladerer    / thomassanladerer   Car Content: ► Mighty Car Mods    / @mightycarmods   ► Drivetribe    / Канал