Скачать с ютуб How To Build A Solder Reflow Oven - The Byte Sized Engineer | DigiKey в хорошем качестве

How To Build A Solder Reflow Oven - The Byte Sized Engineer | DigiKey

If you want to assemble a batch of PCBs with surface mount components you have a few options. You could use a regular soldering iron and magnification and do it all by hand. Or you could use a hot air reflow station to heat up the board and components until the solder melts. But if you have a lot of components or a large batch of PCBs to assemble this could get tedious. In this video I use an Arduino board, a thermocouple, and a solid state relay to build a solder reflow oven using a standard toaster oven. I use a TFT display with a touchscreen display to create a user interface that plots the solder reflow profile. Read more on the DigiKey Blog: https://www.digikey.com/en/maker/proj... Links: Arduino Board - https://www.digikey.com/short/r89b5m0r Thermocouple Amp - https://www.digikey.com/short/cvf70054 Thermocouple - https://www.digikey.com/short/b51mf4wp Solid State Relay - https://www.digikey.com/short/jtb9th9j TFT Display With Touchscreen - https://www.digikey.com/short/brpmf3q8 NEMA 5-15R Power Receptacle - https://www.digikey.com/short/bnzj5138 IEC 320-C14 Power Receptacle - https://www.digikey.com/short/8dtvmmn9 Power Cord - https://www.digikey.com/short/qwjtmwwm Learn More: Github project - https://github.com/bytesizedengineeri... Byte Sized Engineer channel -    / @bytesizedengineering   Maker.io - https://www.digikey.com/en/maker Digi-Key’s Blog – TheCircuit https://www.digikey.com/en/blog Connect with Digi-Key on Facebook   / digikey.electronics   And follow us on Twitter   / digikey