Скачать с ютуб Maintenance Series - Wave Solder - Tech 2 Tech On Demand в хорошем качестве

Maintenance Series - Wave Solder - Tech 2 Tech On Demand

High-tech, high-value cleaning answers made easy. Best practices for wave solder for long-term success. High-tech, high-value cleaning answers made easy. Today we’ll discuss best practices for wave solder for long-term success, and we’ve included additional FAQs below. Unfortunately, many companies don’t pay enough attention to maintenance, meaning they don’t give the time nor have the proper tools to perform accurate maintenance. But lack of maintenance, or improper maintenance results in failures and equipment damage, which costs money. Today we’ll discuss and review the sections of a typical wave solder configuration and show that if one section is not in good condition, there will be problems in the whole system. First we’ll show some causes and consequences of improper maintenance on the fluxer, filer and dosifications and recommended actions to take. Then we’ll talk about the consequences of poor or no maintenance on preheaters, blowers, chains & fingers and offer solutions for those parts. Lastly, we’ll discuss why you shouldn’t use isopropyl alcohol on any maintenance process- and what you should use. Download Q&As: https://bit.ly/3LspCAl 0:10 Intro to Octavio Paredes Valdez & Wave Solder Maintenance 1:29 A Typical Wave Solder Configuration 1:52 The Fluxer: Causes and Consequences 2:15 Fluxer Examples 3:42 Filter & Dosification 4:49 Recommended Actions 5:03 Preheaters 5:19 Preheaters Causes & Consequences 6:40 Blowers 7:34 Recommended Actions 7:51 Chains & Fingers: Causes & Consequences 9:36 Dirty Chain vs Clean Chain Example 9:54 Recommended Actions 11:05 Do Not Use Isopropyl Alcohol! 11:24 Isopropyl Alcohol VS Cleaning Agents 12:46 Conclusion 13:11 FAQ 14:54 Outro Website: http://bit.ly/3Ke050W Twitter: https://bit.ly/351sPan LinkedIn: https://bit.ly/3sHNloS Speaker bio: https://bit.ly/3sIEgg6 Subscribe to our YouTube: https://bit.ly/3oUmODB