Скачать с ютуб DUCATI MONSTER 1200S Clear Clutch Cover Install в хорошем качестве

DUCATI MONSTER 1200S Clear Clutch Cover Install

A fun mod for Ducati Monster by DUCABIKE. Gives a cosmetic flare to the bike as well as some practical uses like changing your clutch plates on the go without having to remove the entire oil bath. Saved $600+ worth of labor at the dealership. Honestly the hardest part was removing the OEM cover. All in all, it was a fun job and seeing it all come together in the end was very fulfilling. First ride out the next day had heads turning, it's a head-turning mod if you will. :P Vehicle: - 2018 Ducati Monster 1200 S --------------------------------------------------------------------------------------------------------------------------- Parts: - DucaBike Oil Bath(Black)/Clear window+rim(black) - DucaBike Pressure plate(Gold) - DucaBike Pressure inner ring(Black) --------------------------------------------------------------------------------------------------------------------------- Tools used: - 5mm T-handle - 4mm T-handle - 5mm allen head bit with a step down adapter - 10mm socket - 3 lb rubber mallet - 20mm bearing remover - Torque wrench(make sure yours goes to 10nm) - Liquid Gasket rated for correct temperature - Torch lighter - Needle-nose pliers - 3M absorbant pads - Blue thread locker - Lintless cloth ---------------------------------------------------------------------------------------------------------------------------