Скачать с ютуб VSR 10: How to fix the slam fire issue. в хорошем качестве

VSR 10: How to fix the slam fire issue.

This is a quick guide on how to fix the TM VSR10 should you be experiencing problems. If the bolt flys forwards before you press the trigger. The sear is slipping. Most likely due to grease build up or a lose part. Sometimes it can be easily fixed by spraying a little bit of WD-40 into the trigger mech. Dont use too much as you dont want it to go into the cylinder. For lubricating the cylinder you want silicone spray known as GT-85 as it will not corrode any rubber seals like WD-40 does. If you are unable to cock the bolt back in the locked position. Again check the trigger mech is correctly lubricated, but also check to see if the spring guide has unscrewed. This can prevent you from being able to pull the bolt back far enough for the sear to lock the piston back.