Скачать с ютуб How to troubleshoot an electric Water Pump Flux System? в хорошем качестве

How to troubleshoot an electric Water Pump Flux System?

In this video, we are going to show you how to troubleshoot the Flux System of a water pump. 0:13 How to know if your Flux System is working properly? We recommend that you install a ball valve after the discharge in your water system. If there is a tap or faucet open and the system is working. A properly working Water Flux System should turn off the water pump as soon as you close the ball valve. In a few seconds, the pump should turn off as shown in the video. If this is the case the Water Flux System should be working perfectly. 0:33 How to know if a Water Flux System is not working properly? Once the flux of water is closed, by the ball valve and the water pump keeps working there could be an issue with the controller. Bear in mind that the water pump does not have to stop immediately, that depends on the length of your system for the Water Flux System to notice that the flux has stopped. 0:41 How to check a non-working Water Flux System? After checking that the Water Flux System is not working properly, since the water pump keeps working even when the water flux has been stopped. You will need to disassemble the system to check for debris or any other issue that is causing problems. Start by removing the piping and taking out the check valve inside the controller and check. Check if the valve is able to freely move. For this carefully take the pieces apart and look for debris and sediments accumulated in any part of your water flux system. Clean all the parts including the spring, the guide, and the valve. Once your system is free of sediments and debris you can re-assemble your water flux system. Put the checks valve back in place. Make sure that the edges align with the grooves and the check valve fits back in place. Re-Assemble and test again. If the problem persists please contact us at 954 474 9090 Chapters: 0:13 How to know if your Flux System is working properly? 0:33 How to know if a Water Flux System is not working properly? 0:41 How to check a non-working Water Flux System? Product: https://pearlwatersystems.com/Downloa... Contact Us: https://pearlwatersystems.com/Contact... Please remember before manipulating an electric water system to: - Always read the manufacturer's product manual - All electrical connections and checks must be done by a certified electrician and comply with applicable local standard - Danger: electric shock risk. When Installing or adjusting an electrical system make sure that all plugs and cables are disconnected from the power outlet - Installation of electrical water systems should be done by certified professionals.