Скачать с ютуб How To Wire & Program a Victron SmartShunt for LiFePO4 Batteries 🔋 в хорошем качестве

How To Wire & Program a Victron SmartShunt for LiFePO4 Batteries 🔋

⚡The Victron SmartShunt is a great way to monitor your battery's performance! It can track things like current, voltage, and temperature, and it will even send you alerts if there is a problem. In this video, we will teach you how to wire and connect a Victron 500A SmartShunt to an SOK Battery. This is compatible with all versions of Victron SmartShunts, and also works perfectly for all SOK batteries, including the 100Ah and 206Ah versions. 🔋SETTINGS: Battery Capacity: Varies depending on system. Charged Voltage: 13.8 (*2 for 24V & *4 for 48V Systems) Discharge Floor: 10% Tail Current: 2.00% Charged Detection Time: 3m Peukert Exponent: 1.05 Charge Efficiency Factor: 98% Current Threshold: 0.10A Time-to-go averaging Period: 3m Battery Starts Synchronized: Disabled (NOTE: you will need to fully charge your battery to sync up SOC%) State of Charge: 30% (NOTE: Set this to 30% with brand new, untouched batteries. They ship at 30% SOC%.) 💡Comment on Discharge Floor: Setting this at 10% is going to set the SmartShunt to indicate 0% remaining and 0 minutes until empty when the battery is actually at 10% charge remaining. This is best for optimal life. If you choose to fully discharge your battery (not recommended) then set this to 0%. If you want to be more conservative (not necessary, these batteries are VERY robust) then set this to 20%. Keep in mind this will NOT limit discharging, just what is visually seen. 🛒 Browse the Products: ⚡ Victron SmartShunt: https://www.currentconnected.com/prod... 🔋 SOK 12V 100Ah Battery: https://www.currentconnected.com/prod... 🔌 Interconnection Cables: https://www.currentconnected.com/prod... #VictronSmartShunt #SOKBattery #InstallationGuide #PowerManagement #DIYElectronics