Из-за периодической блокировки нашего сайта РКН сервисами, просим воспользоваться резервным адресом:
Загрузить через ClipSave.ruУ нас вы можете посмотреть бесплатно ESP32 Audio Input Using I2S and Internal ADC или скачать в максимальном доступном качестве, которое было загружено на ютуб. Для скачивания выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса savevideohd.ru
For my next project, I need to get audio data into the ESP32. The GitHub repo with the sample code for this video is here: https://github.com/atomic14/esp32_audio If you like ESP32 audio videos - I've got a complete set on this playlist: • ESP32 Audio The ESP32 integrates two 12-bit ADCs - ADC1 has 8 channels and ADC2 has 10 channels. If you have an I2S microphone (like the INMP441 you may want to watch this follow up video after this one - • ESP32 Audio Input Showdown: INMP441 v... ) ADC2 is used by the Wi-Fi driver. So we can only use ADC2 when not using WiFi. In addition, some of the pins attached to ADC2 are strapping pins so cannot be used freely. For simple low-frequency sampling, we can use the Arduino analogRead or we can use the Esspressif ADC functions directly (00:38). If you need very accurate readings from the ADC then you can calibrate your ADC (00:46). For chips manufactured recently, this may have been done in the factory. For instructions on how to manually calibrate your ADC please check the Espressif documentation here: https://docs.espressif.com/projects/e... There's also a useful set of utilities here: https://github.com/tommag/ESP32_ADC_C... For audio we should ideally sample at 40KHz - for this, we should use the I2S (Inter-IC Sound) peripheral and DMA (03:40). I've got two microphones break-out boards - the MAX4466 and the MAX9814 (05:00). The power supply from the 3v3 line of the ESP32 is pretty noisy making the audio unusable, but we can fix this by filtering the VIN line and using a separate Low Dropout Regulator to generate the power supply for the microphone boards (6:20). We can also filter out some of the noise by oversampling and then taking an average value as the sample value. I'm using a median filter here in these samples (09:00). The audio is still not great but should be usable for my next project. If you found this video useful then please do subscribe - there will be more videos coming! UPDATE - I've made my own I2S Microphone board for the ESP32 - you can buy it here: https://www.tindie.com/products/21519/ Components: MAX4466 - https://amzn.to/3cdxyGX MAX9814 - https://amzn.to/3uSVOVl ESP32 Dev board: https://amzn.to/3gb6fyc --- Want to help support the channel? I'm accepting coffee on https://ko-fi.com/atomic14