Скачать с ютуб INSTA Shipping Container Vent ( в хорошем качестве

INSTA Shipping Container Vent (

Installation video for #6067 INSTA Vent. Our new and improved design will allow optimal air flow through your container and has a built in bug screen. No welding or painting required! We finished if with a tough powder coat exterior. It's a must-have item for every container! To read more about our INSTA Vent go here: https://instacontainermodification.co... VIDEO TIMELINE 00:14 – Tools Required 00:21 – Ensure all PPE (Personal Protective Equipment) is worn. From the top and side of the #6067 INSTA Vent take record of the opening measurement. 00:32 – Place the vent on the container so the sides of the vent equally overlap the corrugations. 00:39 – Mark the two edges and use a straight edge drawing a line down both sides. 00:58 – Transfer the opening measurements to the container making sure to center them between the existing two lines. 1:12 – Create the outline of the opening using a straight edge to connect the four corners. 1:32 – Using a metal cutting tool carefully cut along the lines. 1:39 – Position the vent in the opening and check the fit to ensure proper alignment. 1:46 – Apply a bead of sealant along the left and right sides of the vent. 1:56 – Place the vent against the container. Using self-tapping screws securely attach the vent. 2:14 – Apply a bead of sealant along the top edge of the vent to seal. 2:26 – From the inside of the container apply a bead of sealant along the upper and lower edges.