Скачать с ютуб How To Repair Chevy Truck Dash Cluster - [RYOBI SOLDER IRON] в хорошем качестве

How To Repair Chevy Truck Dash Cluster - [RYOBI SOLDER IRON]

We use the Ryobi Hybrid Soldering Iron to fix our Chevy truck dash cluster. Our 2003 Chevy Silverado 1500 arrived with no gauges working. Not only were the gauges not working, but the odometer, PRNDL, and DIC (Driver Information Center) didn't work either. These early 2000s dash clusters in the GM trucks and SUVs suffered from many different gremlins. Removing the cluster from the truck is very simple. Once you tilt the steering wheel all the way down and pull the shift lever all the way down, you can easily remove the bezel by just evenly pulling. The bezel is only held on with clips, so no tools are needed. Holding the gauge cluster in are just four 7mm bolts. Once the fasteners are removed, it's as simple as releasing the one wiring harness connection. To repair the chevy truck dash cluster, we moved over to the workbench. This dash cluster goes together like a sandwich, with only clips holding it together. Once the front and back were removed, you can easily pry off the indicator needles for each gauge. Typically you'll notice discoloration on the circuit board where the solder joints have overheated due to a bad connection. Using our Ryobi P3100 18V Soldering Iron, we touched up all the solder joints on the different diodes on the Chevy truck dash cluster. Putting it back together and plugging back into the truck, all the gauges came back to life. Aside from a little technical know-how for soldering small joints, learning how to repair a Chevy truck dash cluster is a fairly simple procedure. Check out our review of the Ryobi P3100 Hybrid Soldering Iron    • Ryobi P3100 18V Hybrid Solder Station...   Keep current with our great content: Facebook:   / shoptoolreviews   Twitter:   / shoptoolreviews   Instagram:   / shoptoolreviews   YouTube:    / shoptoolreviews