Скачать с ютуб BMW V8 m60/m62 full engine build timelapse (part two) в хорошем качестве

BMW V8 m60/m62 full engine build timelapse (part two)

this is part two of building new engine (recorded in timelapse) for my e30 v8 drift project :) in this video you can see second part of build from installing timing components untill finishing bare engine engine is mix of m62b44 and m60b40 parts using m62b44nonvanos engine block,crank,rods,pistons and m60b40 heads with valvetrain,timing components(because double row chain and sprocket in the midle,not U guide) additionally heads are ported and decked to increase CR did some modifications to intake manifold (also using m60b40 intake with bigger runners) by installing 90mm TB,and removeing ccv system build new exhaust headers from scratch 4to1 usead all new bearings,piston rings,seals and gaskets lot of preparing and aditional jobs not recorded both donor engines were disassembled,all needed parts cleaned measured cylinders and crank (both in factory spec) ,after instalation all things like; bearing clearance,piston deck height,valve clearence ect.were measured to be sure everything is ok in total it took more than 300hours