Скачать с ютуб How to reupholstery front 2CV seats with seat covers with sides в хорошем качестве

How to reupholstery front 2CV seats with seat covers with sides

"Welcome to our workshop at the 2CV Mehari Club Cassis" "We are going to show you how to reupholstery your single front 2CV seats with seat covers with sides." “Before starting, undress your seats." "This will allow you to check the condition of your seat frames." "To sand them down and paint them if necessary." "And control what spare parts you will require." "We will pursue with the installation." "You will need" "The canvas sets for each seat." "The seat sponges." "A set of seat rods." "The seat base rods." "A tube of glue." "A set of seat covers." "You require 50 elastics per seat, 200 elastics in all.” "It is important to use elastics of high quality and with shape-memory". "Christian will help me today with the installation." "Start by inserting the base rods into the canvas." "Attach the elastics to the base rods." "A small tip, make sure the stitching on the canvas faces upward.” "You will notice that we have fixed the elastics at the extremities." "This will help to install the canvas evenly." "After installing the seat canvas, we will now install the back rest canvas." "The process is the same. We insert the base rod into the canvas." "Don’t forget to install the canvas with the stitching towards the inside." "As before fix the elastics to the extremities before proceeding with the rest." "You will notice that the seat sponges have two different surfaces." "The glue will be applied to the sponge side." "Make sure that the glue is well spread around the sides and into the corners." "We are using a neoprene contact adhesive, so we will spread it along the frame too." "Christian is using his finger, but you can use a paintbrush to spread the glue." "Let the glue dry for 2 minutes, then apply the sponge to the seat frame." "Position the sponge for the back rest, and cut around the rounded corners." "As for the other sponge, apply the glue making sure it is well spread." "Apply the glue to the frame." "We can now fit the seat covers." "We start with the back." "And then the seat." "You will notice you have one side flap longer than the other." "The longest side flap is to the side of the seat frame where you have a small side bar." "Make sure you have well tucked into place the connecting band." “Turn the seat and make sure you fold the ends of the seat base rods.” “In the seat cover kit you will find a packet of hooks.” “Slide the seat rods into the seat covers.” “Insert the ends of the seat rods into the holes provided on the seat frame.” “Once you have fitted the lateral seat rods, install the front rod.” “At the rear of the seat pull tight the inner flaps of the seat cover.” “Wrap them around the frame and fix them with the hook.” “Do the same with the outer flaps.” “Do the same the other side of the seat.” “Now fix the material at the rear to the seat using 4 hooks.” “Two hooks fixed to the seat canvas and seat base rods.” “The other two to fix the corners.” “Make sure the two corner ones are attached to the seat elastics.” “Pull and attach with hooks the rear seat cover elastics.” “The seat is finished.” “We will now dress the second seat.”